I am a hardcore Mod Podge fan. I have used it since I first began to decoupage, and I have always been happy with the results I get from it; plus, I love the retro-style packaging!
We have different aesthetics, Martha and me, but I do acknowledge and respect her crafty genius. So you can imagine my confusion and delight the day I made a wrong turn in my local Michaels store and stumbled into: Martha Land! I had no idea she had her own line of supplies.
Feeling guilty for betraying my beloved Mod Podge, I quickly snapped up a basic glue stick and the decoupage medium–and they have sat prettily on my craft table ever since, completely untouched–until now. I figured I’d give it a shot: Martha vs. Mod Podge. I decided to decoupage basic small-diameter wooden discs that will eventually become a pair of earrings, one in my usual way with Mod Podge and one with Martha’s product.
Most of the time I use small, cheap brushes (like the kind that comes in watercolors) I like the precision, control over detail and the fact that if I forget to rinse it afterwards it’s no big deal if it gets ruined. It is a tiny hassle to get up and rinse the brushes, however. For large surfaces I use a big foam brush. The fact that Martha’s medium comes with it’s own brush is a big perk.
I used Mod Podge on the first disc. It smells and looks like basic all-purpose white glue. I like that you can see immediately where you have applied it (though it dries clear). I like to “glue” down the fabric then apply a thin layer on top immediately to seal it all in.
Moving on to Martha: wow–the brush is huge. The medium is thinner than Mod Podge and clear. I assume it will dry shiny–it doesn’t.
I dripped the product all over the sides of the bottle because so much gets on not only the brush but the stem as well. I had wipe off the excess onto the lip of the lid then quicky do the same for the stem to avoid major dripping.
It was hard for me to see where I applied it because it was clear, which was a bummer. The fabric didn’t seem to lay smoothly and started to fray a bit at the edges, which has never happened to me before. It was hard to have much control over the brush and I ended up painting my fingers as well.
By this time the Mod Podge was dry and the disc was ready to get a coat of varnish. (I use Triple Thick) I like being able to tell that it is fabric underneath so sometimes I skip this step, but since this is jewelry I want it to be able to withstand a bit of rain if it has to.
Back on Martha’s end, it seems that the decoupage medium has soaked into the fabric. It looks gummy and very wet still. I start a new project while I wait.
About half an hour later Martha’s disc is all set. I applied a coat of varnish then noticed that the Triple Thick is dry on the first disc so I was able to turn it over and use Mod Podge to attach fabric to the back of it.
I was feeling like it wasn’t very fair to make up my mind after one use so I decided to start a second project, on a large disc. I figured the brush might come in handy on a bigger surface.
I applied the product to the disc then pressed down the fabric. This fabric is 100% cotton instead of jersey like the first project so I thought it would not soak through the way it did the first time.
I was wrong. I got a weird dark patch where it was being absorbed into the cotton. I was hesitant to apply a coat on top immediately because I wasn’t sure if it would ruin the piece.
I work with scraps, which I love. Not only for the eco-factor but also because it forces me to be more creative and use what I have. It also keeps me from making too many of the same thing, if I get stuck on a fabric I love. So I can’t take the chance of ruining a tiny scrap that I can’t replace.
At this point I see that the medium is not holding the fabric to the wood and it is peeling up. I recap Martha and set her back in her spot on my crafting table. I’ll redo this piece with Mod Podge (the saturated spot did dry clear luckily).
*The next day:
I let everything dry over night. The Martha decoupage medium still wasn’t dry and I couldn’t apply varnish and move forward with the construction of the earrings until it was. This morning I went to check on them, the Mod Podge disc was fine and ready to go, the Martha disc had strange puckers and dimples in the fabric.
- Nice packaging
- Comes with a brush
- Made by Martha!
- Might be good for scrapbookers and other crafters using paper or something thinner than fabric in their work.
- Doesn’t work at all for what I need it to do. Granted, they don’t list fabric as something that it will be compatible with but it does say “paper…and more” on the label which led me to believe it was a possibility.
Will I repurchase in the future? No. And if I had my receipt, I would be tempted to return it.
Price: for$3.99 for 4oz. (currently 30% off at my local Michaels store)
- This two-in-one glue and sealer is great for all your decoupage projects.Includes brush applicator.
- Ideal for decoupage with greeting cards, tissue paper, magazine pages, postcards, stamps, tickets, and more.
- Non-toxic & acid-free
- Dries clear
Where to buy: The Martha Stewart line is now carried at Michaels, A.C. Moore and some WalMart stores.
Have you tried any of Martha’s products? What did you think? What is your favorite decoupage medium?