Traveler’s journals are hot right now, and they are perfect for creating mini scrapbooks while you are actually on your trip. But did you know that it is surprisingly easy to create your own cover that is themed to your trip? In only a few steps, you can learn how to sew your own traveler’s journal cover!
[Disclaimer: Some links in this article are affiliate links to Amazon.com that pay this site a commission at no cost to you when you make a purchase after clicking.]
Since I was anticipating spending a few days in Paris as part of my trip to Creativeworld in Frankfurt, I decided to make myself a Paris themed journal to record this long-awaited trip. My traveler’s journal cover holds three Midori Traveler’s Notebook refills – just enough to have one for each day in Paris, and one for my time in Frankfurt at the show.
You do not have to be an advanced skill sewist to learn how to sew your own traveler’s journal cover. There are no fancy techniques in this project. It’s about choosing the right materials and tools. If you can use an iron and an eyelet setter, and sew a straight line, you can make your own traveler’s journal cover for your next trip!
DIY Traveler’s Journal Supplies:
- 2 – 10″ x 12″ pieces of cotton quilt fabric (I used Robert Kaufman’s Paris Adventure Collage)
- 2 – 9″ x 11″ pieces of ByAnnie’s Soft & Stable
- 3 – 9″ x 11″ pieces of Thermoweb Heat’n Bond Lite
- Dritz Round Cord Elastic
- Dritz 2 Part Eyelet Tool for 5/32″ Eyelets
- Dritz 2 Part Eyelets – Black 5/32″
- Dritz Fray Check
- 3 – Midori Traveler’s Notebook refills (blank 003)
How To Sew Your Own Traveler’s Journal Cover:
1) To begin, cut your fabric and interfacing to sizes indicated in supply list.
I selected a Paris themed fabric for my journal, to fit my theme, and used the same fabric for the inside and outside of the journal. If you’d like to have different colors or patterns on the inside and outside of your journal, just cut each 10″ x 12″ fabric panel from different fabrics. This project is great for using up leftover fabric!
ByAnnie’s Soft & Stable, if you have never used it, is what is known as “headliner” fabric – an extremely thick sewable interfacing that is perfect for giving structure to projects like bags and totes. Using it adds a whole new level of professionalism to your sewing, and it makes a great shortcut to stiffen this traveler’s journal cover.
2) Following the package instructions, iron a piece of the Thermoweb Heat’n Bond Lite onto one side of each of the pieces of Soft & Stable. Center each of the pieces of Soft & Stable on top of the back side of a piece of the fabric with the Heat’n Bond side down, and iron to adhere.
3) You should now have two pieces of fabric with a piece of Soft & Stable adhered to the center of the back of them, with a half inch of fabric showing all around it.
4) Fold the corners of the seam allowance in diagonally and iron in place. Then fold over the sides and iron in place as well. (By folding the corners in first, this will leave you with nice clean mitred corners!)
5) After trimming it down slightly, iron the remaining sheet of Heat’n Bond Lite onto the back of one of the cover pieces. Then lay the other cover piece back to back with it, make sure they are correctly aligned, and iron to adhere them together with the Heat’n Bond.
6) Sew around the outside edge of the covers with a sewing machine, stitching approximately 1/8″ from the edge. If necessary, pin the two covers together to keep the edges aligned while sewing.
Now you have the structure of a cover, but it needs attachments for the journal books. My finished cover looked like the photo above. It has two loops of elastic cord, anchored in different ways to hold the three journal books.
First, you need to create the eyelets that are the anchors of the whole cord system.
7) Using a tool like a CropADile or a leather punch, make two holes 5/32″ or slightly smaller that are centered 1/4″ in from the edge along the center fold of your traveler’s journal cover.
8) Place the 5/32″ two part eyelets in the holes and firmly set them using the Dritz 2 Part Eyelet Tool.
9) Cut a piece of round elastic cord that is slightly more than twice the height of your traveler’s journal cover. Thread it snugly through the eyelet holes and knot it at the bottom of the outside of the cover’s spine. Snip off the excess cord and apply Dritz Fray Check to keep the ends from fraying.
10) For the second cord, cut a piece of cord just slightly longer than the distance between the two eyelets. Fold the cord in half and holding both strands together, tie a half knot to create a loop. Trim the ends and apply Dritz Fray Check to secure them.
11) Thread the loop through the eyelet at the top of the traveler’s journal cover, leaving the knot on the outside of the cover. Pull the loop so that it lays underneath the elastic that is threaded through both eyelets. (See picture after #6 above for reference.)
12) Open a journal book to the center staples and slide it under the loop that goes through both eyelets. Close the journal book, capturing the elastic in the center page. This book is now your center of the three journal books.
13) Insert the center page of a journal book through each of the elastics on either side of the center journal book.
14) To keep your journal closed, cut a piece of round elastic cord that fits snugly around the closed journal and tie it. snip the ends and treat with Dritz Fray Check to protect from fraying.
Your journal is complete! I chose three blank books for my journal, but there are lined, graph, and plenty other types of Midori journal books available. Mix and match to create space for writing and drawing, or whatever else you can imagine!
Once you know how to sew your own traveler’s journal cover, it is easy! You won’t be able to stop making them! I’m already planning my next one!
Latest posts by Nancy Nally (see all)
- Graphic 45 Little Women Giveaway Winner! - May 17, 2018
- National Scrapbook Day Giveaway – Win Graphic 45 Little Women! - May 5, 2018
- Review | Polaroid Zip Mobile Printer with Zink Technology - October 19, 2017