Archive | Clay

Review | Firefly Sculpey Fun Forms

Reported by Beth Silaika

One rainy day, my son Xavier and I decided to review the Dinosaur Firefly Sculpey Fun Forms kit. It was a perfect rainy day activity and he was quite enthusiastic to create his own Triceritops.


The kit contains 8 pieces – the form, some clay and a few tools to detail your sculpture. The kit is for ages 8 and up. Xavier is turning 7 this weekend, so with supervision, I felt it was age appropriate.


We started by reading the directions, which were pretty specific. You could create one of two types of dinosaurs: Stegosaurus or Triceratops. We chose the Triceratops. There were step by step directions on how to create each size of clay to form our dinosaur.


Xavier could not wait to start forming his dinosaur, so I let him start by rolling out the clay in the forms into the shapes they specified. This was actually a great project for him to work on since he has fine motor delays.


The clay can be sliced with the tool provided in the kit and then slowly rolled and softened to form the shapes.


The directions are labeled with each pack of clay which must be formed into specific shapes. The directions are in black and white, and it would have been nice to have the photo on the directions in color, just to distinguish between the tan, brown, and clay colors.


The roller tool in the kit allowed you to evenly flatten the pieces of clay into the shapes required to cover the plastic dinosaur form.


We were not sure of the exact size of the shapes required, so we really had to guess based on the amount of clay. It would have been nice to have the directions specify the size of the specific shapes (e.g. make a 1/4 inch flattened circle).


Xavier was able to easily press on the clay to the form, but I helped him press it and mold it tight so that the colors flowed together.


With a little bit of help from the tools provided in the kit, we soon saw the Triceratops take shape!


Some final pieces of clay on the bottom and we were just about finished and ready to bake our Triceratops (which we affectionately named “Brownie”….I talked him out of “Horny”).


The finished form was ready to bake in the oven. It was only a few minutes of baking time to completion.


Here is the finished product. It doesn’t look like the dinosaur on the cover of the box, but it is something that Xavier treasures!


We both really enjoyed working with the Firefly™ Sculpey® Fun Forms™ Dinosaur kit. It was a nice change of pace from watching television or playing video games on a rainy day!


  • wonderful variety of choices for a personalized toy for your child to make
  • great project for a rainy afternoon
  • realistic looking, durable final project
  • non-toxic


  • directions were difficult to follow in black and white; color directions with specific sizes would be better
  • messy – colors of clay can bleed and you need to wash your working surface and hands between colors to avoid colors mixing
  • clay is very hard, but if you set it under a light for a few minutes and work it with your hands and condition it, it becomes softer.

Have you tried the Firefly Sculpey Fun Forms yet? What do you think?

Sculpey Clay & Conditioning Machine

Reported by Erika Martin
When I was younger, I played around a little bit with modeling clay, but it was always the cheap stuff. Usually very hard in the package, my hands got sore and felt arthritic from softening it. Or, it was the clay we used at school, which we knew had been touched by a bunch of other students and had a funny smell.

For years, I’ve seen the Sculpey clays in stores, but it wasn’t until just recently that I found a love for working with it. When I reviewed the book, “Beyond the Bead,” I picked up some clay to create some of the jewelry projects featured in the book. A whole new world of crafting possibilities opened up to me. My almost-10-year-old daughter also got into it and we bought her a stash of her own clay so she could create with abandon.

Last week, I picked up the Sculpey Clay Conditioning Machine and WOW! Even more possibilities have opened up to me!

I want to show you some techniques I’ve learned along the way, as well as how to use the Clay Conditioning Machine.

Sculpey clay may seem hard when you hold the package in your hand, but it’s actually very easy to soften in your hands. It’s great therapy, too. It might be a bit difficult for some, though, if you have muscle problems or arthritis, which is where the clay conditioning machine will come in handy.

I like to cut off small pieces with an X-acto knife as I find them easier to work with and soften when it’s in smaller pieces.

I roll the clay into a ball and then clasp my hands together and wring my hands like I would do if I were nervous (that’s the best way I can describe it). For me, I find that this is the easiest and quickest way to soften the clay.
Once you’ve softened the clay, you can then work it and sculpt it free hand if you’re feeling adventurous. This is a great way to get your kids involved in imaginative art. It’s amazing the things they’ll sculpt as their imagination lets loose.
Roll out different colors of clay to add dimension and color to your projects. I like that the clay sticks to itself really well as I’m creating and layering. I find that any small pieces that don’t stick completely can always be put back on after baking the clay with a small amount of craft glue.

I seal all my dimensional pieces with a thin coat of matte finish Mod Podge.
The Clay Conditioning Machine (also by Sculpey) is very easy to put together and take apart. It’s wonderful for softening clay if you’re using it for free-hand sculpting or if you’d like sheets of clay to work with. There’s 9 thickness settings on the machine, which gives you lots of options when crafting.

The C-clamp and the handle are separate pieces, but easily fit into the machine by popping them in place. The machine should always be clamped to a surface when using it. The handle won’t turn a full revolution if it’s not clamped onto a surface, as the handle needs to turn past the bottom of the machine.
I cut a couple of slabs of clay from my block with an X-acto knife, set them side-by-side above the rollers, and then turned the handle. The clay went through very smoothly (the directions state not to try to push excessively thick clay through the rollers) and this started the conditioning.
I dialed the setting to #2 and sent it through again. I set it to #3 and realized it was too thin. The great thing about clay and the machine is that you can roll your clay in your hand and send it back through the machine on a different setting if you need to.

I stamped into my moss-colored clay with a fern image, making sure to put a good amount of pressure on it to get a good impression.

I used an X-acto knife to cut around the fern before baking it according to the package directions (275 degrees, 15 minutes).
I had some moss clay left over and decided to blend it with some brown clay to create some rolled beads. I sent some brown clay through the machine to get it the same thickness as the moss clay. I layered the pieces of clay on top of each other and then put them through the machine to bind them together. I used my X-acto knife to trim the edges of the clay to make them even.
I then rolled my clay and kept rolling it back and forth to bind the clay together and also form the tube to the length and shape that I wanted.
I cut slices of the clay to create my beads. I kept them the shape that was created when I cut them, though I could have shaped them in my hand a bit to make them completely round.

HINT: If you want to get rid of any fingerprints on your clay pieces, you can either wear a tight pair of rubber gloves or you can also wipe your pieces quickly with your finger to smooth the clay out.
A couple of beads were a bit uneven on the ends (these were the two on either end of the tube) so I put the beads through the machine and got long flat pieces with a really cool effect that will work great as pendants or earrings.
I used a large tapestry needle to make the holes in my beads. I then heated all my clay pieces for 15 minutes at 275 F degrees.
I added some wire elements to my bumble bee for the antennas and the wings. I also placed and eye pin into the body to eventually turn this into a key chain. I used a black glaze pen to complete the eyes.
I rubbed some gold metallic rub-on paste to my beads for a vintage feel and strung them on a cord with green and gold beads to create a necklace.

I also rubbed some of the rub-on paste on the fern that I created and will use this on an upcoming scrapbook page. (If you’re using rub-on paste, make sure to seal your pieces so that the paste doesn’t rub off.)
So, what have you made with Sculpey clay? Have you used the Clay conditioning machine? What’s your favorite Sculpey clay color?

Prang DAS Air-Hardening Modeling Clay

Reported by Tami Bayer

Prang DAS Air Hardening Modeling Clayis available in 1.1 pound and 2.2 pound packages in either white or terra cotta. It takes approximately 24 hours for projects to dry depending on thickness and is certified non-toxic.

Ok, let’s get down to the nitty gritty. This is a fun product to play with. I think it helps that I took ceramics in high school, so the tactile part of it takes me back. It doesn’t have the same qualities of firing clay, but the beauty is that you don’t need a kiln or even a toaster oven. Just play, create, and set aside until the next day. I think the setting aside part is a real exercise in patience. I don’t have a small child here to test the product, but instead a reluctant teen who helped me with my product testing.

Here is what we discovered when working with this product. It dries out quickly if you handle it a lot, so keep the clay you aren’t using in a ziplock bag. It doesn’t work well to attach pieces together. Try to make your creation from one piece of clay. It rolls out beautifully to cut out shapes. This is what we focused our efforts on, rather than molding pieces with our hands. We rolled out the clay with a small wooden dowel on a sheet of thick plastic. A piercing tool and plastic knife worked well to help us cut out and make holes in things. It takes well to molding with various products such as cookie cutters, cookie molds, plastic molds, and even a metal charm. It stamps like a dream with a rubber stamp. I put Stazon ink on the stamp first and then stamped it. The ink didn’t transfer much, but the image is beautiful. Here is a peek of our trials and what we used to make them.

I noticed when working with this clay that it has qualities to it similar to paper. When I didn’t cut it cleanly if left little pieces similar to what happens when you tear paper. I believe there might be paper pulp in this product, but I can’t find a list of ingredients anywhere. It is lightweight after drying. It takes a very fine sanding from an emery board well. As far as painting your final project, just about any paint works well, including inks. The only thing I would avoid is anything that uses a lot of water, as you don’t want to get the clay too wet. I would seal the final product if it will be handled much. I wish we’d had this product back when we were making salt dough ornaments. This would have been so much smoother to work with for handmade ornaments. I plan to use this to make some more stamped embellishments. I just love the way it took to the rubber stamp.


  • Don’t need to heat up the house, this air dries
  • Non-toxic
  • Takes on texture and shape beautifully


  • Patience is needed to wait 24 hours for drying time
  • Difficult to attach pieces of clay together
  • Dries out if you don’t keep it in ziplock bag

I would rate this product as an 8 out of 10. I’d love to know if you’ve tried it and if you have any other tips for us.